°MEQU °M Warmer System - Starter Kit Plus Item # 35-0048
*** °MEQU Products are restricted to DoW and Federal Purchases ONLY. Please contact Customer Service for details.***
- Easy Setup: User-friendly design; Standard Luer Locks
- Lightweight: Battery with warmer only 1.8 lbs.
- Instant Warming: Warms fluids in less than 10 seconds
- Meets TCCC Guidelines: Warms fluids to body temperature at flowrates up to 150 ml/min.
- Large Warming Capacity: Warms up to 2L of cold fluids on one fully charged battery
- No Maintenance: Wipe clean and recharge after use
- Field-proven: In use since 2018 in both Military, HEMS, EMS and Hospitals
- Dust and Splashproof: IP54 battery and warmer
- For the entire continuum of care: °M Warmer can stay with the patient for up to 72 hours
- Adhesive Patch: For secure attachment close to the infusion site
- Interoperable: Seamlessly supporting continuity of care across the entire patient journey
A Portable Blood and IV Fluid Warming System
°MEQU has developed an IV-blood warmer for emergency transfusions. It’s a portable fluid warmer which warms up blood from cold to body temperature within seconds.
Fast set-up time and intuitive use
The set-up time is less than 30 seconds, and the user-friendly design ensures that the °M Warmer System cannot be assembled incorrectly.
High flow rates and large warming capacity
Blood and other infusion fluids can be heated from 5°C to 37°C at flowrates up to 150 ml/min. One charged battery can heat up to 2 liters of cold fluids 5°C or 4 liters of fluids at room temperature ( 21°C) to body temperature.
Low weight and compact design
The °M Warmer System has a compact design and weigh from 1.8 lbs. (820 g.) making it portable and ideal for prehospital use.
Adhesive for secure attachment close to the infusion site
The single-use warmer’s small size (3.94 in. x 2 in. x 0.79 in. / 10 cm. x 5cm. x 2 cm.) allows it to be attached to the patient close to the infusion site, using its integrated adhesive pad. This secures infusion site and reduces heat loss in the tubing.
The °M Warmer System is approved for use in helicopters and airplanes.
Kit Contents
- 1 x °MEQU °M Warmer (5pk)
- 1 x Powerpack+ Battery
- 1 x AC Charger
Operating Parameters
- Output temperature range: 39°C (+/- 3°C at flowrates from 2-150ml/min)
- Max fluid warming volume on one fully charged Power Pack Plus (output temperature of min. 36°C):
- Input temperature 5°C:Power Pack+: 2LInput temperature 21°C:Power Pack+: 4L
- Priming volume: 3.5 ml (including tubing and luer locks)
- Maximum inlet pressure: 300 mmHg
Environmental
- Continuous Operation:
- Relative Humidity RH:15-95%Pressure:60-106kPaTemperature:Charging the Power Pack Plus: 10°C - + 40°C
- Fluid warming mode (any power source connected): 0°C - + 40°C
- Storage and transportation:
- Relative Humidity RH:15-95%Pressure:60-106kPaTemperature:-20°C - + 50°C
- Transient Operating Conditions:
- Relative Humidity RH:15-95%Pressure:60-106kPaTemperature:-20°C - + 40°C
- Shock and vibration: Power Pack: ISO 1789 + A2 Sec. 6.4
- Basic safety and essential performance: ISO 60601-1-12
- Electrical compliance: ISO 60601-1
Product Specifications
- Size Dimensions:
- °M Warmer: W 1.97 in. x L 3.94 in. x H 0.79 in. (5 cm. x 10 cm. x 2 cm.)
- Power Pack+: W 3.54 in. x L 7.09 in. x H 1.38 in. (9 cm. x 18 cm. x 3.5 cm.);
- cable length: 47.24 in. (120 cm.)
- AC Charger: W 2.95 in. x L 4.61 in. x H 1.73 in. (7.5 cm. x 11.7 cm. x H 4.4 cm.);
- cable length: 66.14 in. (168 cm.)
- Product Weight:
- °M Warmer: 0.24 lbs. (110g.)
- Power Pack+: 1.57 lbs. (710g.)
- AC Charger: 0.55 lbs. (250g.)
